 |
||||
|
||||
|
||||
Please
select a site using the World Map Above or the Buttons Below |
||||
 |
||||
 |
||||
|
 |
|||||
|
MBA Polymers Material Data Sheet for PP
Typical properties of 100% post-consumer MBA Polymers PP without physical property modification
PROPERTIESa |
TEST |
units |
MBA PP |
Density |
ASTM D 792 |
g/cm3 |
0.92 |
Melt Flow Rate 230° C/2.16 kg |
ASTM D 1238 |
g/10min |
24 |
Tensile Strength @ Yield |
ASTM D 638 |
MPa (psi) |
22 (3200) |
Elongation at yield |
ASTM D 638 |
% |
5.2 |
Tensile modulus |
ASTM D 638 |
MPa (psi) |
2010 (2.91x105) |
Tensile Strength @ Break |
ASTM D 638 |
MPa (psi) |
19 (2760) |
Elongation at break |
ASTM D 638 |
% |
25 |
Flexural strength at 5% |
ASTM D790 |
MPa (psi) |
32 (4570) |
Flexural modulus |
ASTM D790 |
GPa (psi) |
1100 (1.59x105) |
Izod Impact Strength (23 ° C) |
ASTM D 256 |
J/m (ft lbf/in) |
62 (1.2) |
DTUL @264 psi (1.8 MPa) |
ASTM D648 |
° C |
59 |
DTUL @ 66 psi (0.45 MPa) |
ASTM D648 |
° C |
94 |
Color |
- |
- |
Gray |
aTypical property values not to be construed as specifications.
Tensile
testing was performed at 0.2 inches per minute due to
the
low elongation at break for this material.
Download the printable .PDF Data Sheet for PP
To check our Material Data Sheets, please click below . . .
|
 |
 |
 |
Please fill out the FORM on the BUY FROM US Page.
Back to BUY FROM US Page
MBA
Polymers, Inc.
500 West Ohio Avenue, Richmond,
CA 94804
(510) 231-9031 • FAX:
(510) 231-0302 • info@mbapolymers.com
Buy
From Us || Sell
To Us || MBA
in the News || Jobs
at MBA
Home || About
Us || What
We Do || Links || Contact
Us
Copyright © 2000
MBA Polymers